FLUNA OPTIK PRO

Discover the Fluna TFT Optics Cleaner for binoculars, riflescopes, and spotting scopes, as well as flat screens, plastics, and rubberized surfaces.

With Fluna Tec's gentle, alcohol-free foam cleaner, you can ensure maximum visibility, precise aiming, and optimal working conditions on screens. Regular optics care is essential for accurate shooting and detailed recognition of observed objects. With the Fluna TFT Optics Cleaner, you have every situation under control—whether during sports, hunting, in the office, or at home. From now on, you only need a single cleaner for all glass applications.

Fluna Tec's aerosol foam cleaner completely removes dirt, nicotine, insects, grease, and fingerprints, as well as the unsightly patina of hand sweat and dust, from smooth surfaces.

Notes:

• Versatility : Fluna Optik Pro is suitable for a wide range of surfaces, including optical glass, plastic, and rubberized surfaces. It can be used on binoculars, riflescopes, spotting scopes, as well as flat panel displays and other glass objects.
• Material compatibility : The cleaner is alcohol-free and therefore won't harm sensitive surfaces. Furthermore, the foam doesn't penetrate casings or gaps, protecting electronic components.
• Application on screens : When cleaning flat screens or other electronic displays, it is recommended to turn off the device and apply the foam evenly. Allow it to work for a short time, then wipe it off with a soft cloth.

1. Preparation :
   • Removing loose dirt : Carefully blow dust and coarse dirt off the optics with compressed air to avoid scratches during cleaning.
2. Application :
   • Spraying : Shake the Fluna Optik Pro spray can well. Hold the can about 20 cm from the surface to be cleaned and spray the foam evenly onto the glass or plastic surface.
   • Allow to work : Leave the foam on for a few seconds to remove dirt such as grease, fingerprints or dust.
3. Cleaning :
   • Wipe : Use a clean, dry, and lint-free microfiber cloth to wipe away any loosened dirt along with the foam. Be sure to wipe in a circular motion to avoid streaking.
   • Polishing : After removing the foam, polish the surface with a dry part of the cloth until it is clear and streak-free.